Mozilla officially announced its very own VPN service captured, and also the company promised it would bring support for other platforms at some point in the near future.

While no specifics were provided, Mozilla continues to be focusing on the official clients for Linux and Mac, so nobody knows without a doubt when users could connect with the VPN service if they're running one of these simple two platforms. Fortunately, the dev community lends Mozilla help, so while everyone is awaiting the organization to bring Mozilla VPN to Linux and Mac, here's a third-party tool that does might a little more.

As discovered by GHacks, the app is known as MozWire, and it is on GitHub as an open-source project. It's not aimed limited to Linux, but at several other platforms too, including Windows, in which the official Mozilla VPN client can also be offered.

"MozWire is definitely an unofficial cross-platform client for MozillaVPN, finally giving Linux, macOS, FreeBSD, OpenBSD yet others (all platforms supporting the WireGuard protocol) users access for this VPN provider. MozWire will also support Windows," the official description published by the developer explains.

When you will find all instructions to install and run this unofficial Mozilla VPN client on Linux and macOS around the GitHub page linked above, what you ought to know is that the app also has a series of additional features unavailable within the official app.

For example, among the cool features that Mozilla isn't offering is support for multihop servers, and the developer explains that their app has additionally been specifically created to allow users to find the remote port, thus making it possible to bypass firewalls. Again, this really is something that's unavailable within the official Mozilla client, but I think the company should add this at some point in the future given it's quite important functionality for lots of users behind firewalls.

Additionally, MozWire also supports native WireGuard clients that are offered around the platforms in which the app is deployed.

At this time, Mozilla VPN is only available on Windows 10, Android, and iOS in some regions, like the Usa, the uk, Canada, New Zealand, Singapore, and Malaysia. Support for Mac and Linux is still listed as coming soon on Mozilla's website.

"The new VPN clients are suitable for Android (version 6 and up), Windows 10 (64 bit), and iOS. Mac and Linux customers are not far off," Mozilla explains.

Mozilla VPN is available with a $4.99 per month subscription, also it offers support for more than 280 servers in more than 30 countries. One subscription can be used for 5 devices, and Mozilla promises that it doesn't log any network activity when clients are connected to VPN.

"We don't log, track, or share any of your network activity. We adhere strictly to Mozilla's Data Privacy Principles, and we only collect the most minimal data necessary to keep your VPN healthy and operational," Mozilla explains. "WireGuard protocol encrypts your network traffic protecting all of your private information. When compared with existing VPN protocols, WireGuard's lightweight code is easier for security analysts to examine and audit - making it a far more secure option for the VPN. Additionally, your online activities can remain anonymous because we never log, track or share your network data."

During the time of writing, Mozilla VPN remains available only on Windows, Android, and iOS, and the company hasn't shared any specifics regarding when it plans to roll out the Linux and Mac clients. Simultaneously, the organization didn't reveal when it intends to expand Mozilla VPN to more regions besides the ones mentioned above.

AMD has announced the availability of a latest version of their Radeon Software Adrenalin Edition Graphics driver, namely the 20.8.2 (20.20.01.16) package, which adds support for Microsoft Flight Simulator, Mortal Shell, in addition to Marvel's Avengers Open Beta.

Moreover, the current release also includes compatibility using the An overall total War Saga: Troy title and offers to supply to 12% better FPS performance while using the High preset around the Radeon RX 5700 XT cards.

Besides these improvements, the 20.8.2 update resolves the machine hangs encountered when exiting system sleep (on some AMD Ryzen 3000 Series products) and corrects the improper error messages displayed by the Upgrade Advisor.

However, AMD's driver may still notice a few problems with Radeon RX 5700, Radeon RX 5000, Ryzen 7 3000, and Ryzen 4000 system configurations, as well as with Enhanced Sync, FreeSync, and Performance Metrics Overlay much like described within the Release Notes below.

When it comes to compatibility, besides a supported GPU, take into account that your configuration should be managing a 64-bit variant of Microsoft's Windows 7 or Windows 10 os's. There are two files available, one for each platform.

Therefore, remove any previous version present on your computer, save and run the right package for your system, wait for all files necessary to be produced available, and follow all instructions shown on the screen for a complete upgrade.

With this thought, if you consider employing this release, download AMD Radeon Adrenalin Edition Graphics Driver 20.8.2, do the installation and execute a reboot once finished. Also, return around to stay "updated about a minute ago."

If you want Mac mouse cursors, you are able to set them up in Windows 10 too. Here are the steps you should follow to install mac cursor in Windows 10.

The default cursor style in Windows 10 is fairly good. If you wish to, you may also change the cursor size. Fortunately, if you do not such as the default cursor style in Windows 10, you can change it out to whatever you want using CUR files.

For example, when compared to regular pointer cursor, I really like the gloved pointer in macOS. If you too like the mac cursor styles, you are able to set them up in Windows 10 making the Windows cursor seem like mac cursor. All you have to do is download mac OS Mojave cursor or mac OS high sierra cursor and add them to the Windows 10 pointer styles.

In this quick and simple post, allow me to demonstrate the procedure to set up the mac mouse cursor in Windows 10.

How to Install Mac Cursor in Windows 10

First, visit the Github page to download macOS Sierra cursors for Windows.
On the page, click on the "Code" dropdown menu and select the "Download as zip" option. This will download the cursor pack.
After downloading the zip file, extract the folder inside it to the desktop.
Open the extracted folder.
Find the "Install.inf" file.
Right-click on the "Install.inf" file and choose "Install".
If you notice a UAC (User Access Control) prompt, click "Yes".
You've installed the mac cursors in Windows. You now have to apply them.
To use mac os cursors in Windows, open the Settings app.
Go to the "Devices" page.
Go to the "Mouse" page.
Click the "Additional mouse options" link.
Visit the "Pointers" tab.
Select "macOS Sierra 200" from the Scheme dropdown menu.
Click "Ok".

That is all. As soon as you click on the Ok button, Windows will apply the mac os cursors in Windows 10. Actually, you can instantly see the new cursor in action.

When you are saving the changes, if you notice a Replace Scheme prompt, click "No".

Restore Default Windows Mouse Cursor

When needed, you can reset the Windows cursors to its original scheme. Here's how to get it done.

Open the Settings with "Win + I" keyboard shortcut.
Go towards the "Devices → Mouse" page.
Click around the "Additional mouse options" link.
Go to the "Pointers" tab.
Select "Windows Default (System scheme)" in the Scheme dropdown menu.
Click "Apply" and "Ok" buttons.

Once you save the changes, the default Windows cursor scheme is going to be restored. You will see the alterations instantly.

Every time your computer boots or wakes from sleep, you have to click your mouse button or swipe up to make the lockscreen disappear before you get hit having a login prompt.

It can save you time and a click by disabling the lock screen on and on right to the login screen in Windows 10. Here's how.

1. Open the registry editor. Hit CTRL + R, then type regedit into the prompt striking Enter. Click Yes should you receive a warning from User Account Control.

2. Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows by opening the various folders within the tree.

3. Produce a new registry key called Personalization if one doesn't already exist. To create the important thing, right click in the right pane, select Key from the menu and then rename the key to "Personalization."

4. Navigate the Personalization key.

5. Right click in the right pane and select New then DWORD (32-bit) Value.

6. Name the new value "NoLockScreen" (without quotes).

7. Set NoLockScreen to 1 by double hitting its name, entering a "1" within the Value data field and hitting OK.

After the next reboot, the lock screen will be gone. If you want to re-enable it, just alter the registry setting from 1 to 0.

The Windows 10 Taskbar already enables you to pin your favorite websites, but navigating to a specific one is hit or miss with Cortana. If you want to skip the frustration, there's an easy tweak that allows you to incorperate your own URL field, this provides you with you the ability to navigate to any website while not having to open a browser first.

1. Right click on the Taskbar and unlock it by clicking the Lock the taskbar option. If the option isn't checked, you can skip this step. It ought to come checked automatically, though.

2. Right click once again and click Toolbars > Address.

3. Now, you have a URL field towards the bottom right of the Taskbar. For doing things, simply type in a URL and press enter. Windows will open the hyperlink in your default browser.

4. To get rid of it, simply work in reverse order and repeat steps 2 and 1.

Not too long ago, Microsoft silently started working on something that many users considered to be huge news: support for Android apps on Windows 10 Mobile, an update that will have resolved the lack of apps on the mobile platform for good.

And while the software giant has already abandoned Windows 10 Mobile, the program to create Android apps to its operating system is still on the table. And the great news is the fact that it's already happening.

Microsoft has recently announced that the Your Phone app will be updated with new functionality that will allow users to run Android apps directly on their Windows 10 desktops.

First of all, what's Your Phone? This new app, which works mostly with Samsung phones, allows Android devices to pair their mobiles with Windows 10 computers and then access the photo gallery, get phone notifications on the desktop, as well as mirror the screen using the pc.

Theoretically, this is something which sounds pretty cool, but however, it's also a well known fact that massive improvements are still required. For instance, refreshing notifications is often a painfully slow procedure that takes additional time than it should, eventually defeating the objective of staying up-to-date with what's happening on the phone.

But Microsoft doesn't want to stop here and has recently caused Samsung for an even more groundbreaking feature that will allow users to run Android apps on Windows 10.

As compared to the original plan that Microsoft been on mind for Windows 10 Mobile, Windows 10 users won't be allowed to install Android apps directly but run them using their cellular devices. This means the Samsung phone needs to be paired with Windows 10 through the Your Phone app.

The knowledge with Android apps is going to be as native as you possibly can, so you'll even be in a position to pin them to your taskbar, even when they're actually installed on the Samsung smartphone. Furthermore, they'll display in the Alt + Tab app switcher, alongside Windows apps and Microsoft Edge tabs.

These apps will run in their own individual dedicated window outside the Your Phone app, so overall, it'll be pretty much an Android app running on Windows 10, all powered by a mobile phone linked to your computer.

There are limitations, and Microsoft names some of them:

Only the Galaxy Note20 supported initially, more devices coming at a later time
Not all Android apps is going to be supported
Some apps might only support touch input
Some apps might block mirroring on the desktop
Some apps might display a black screen instead of the UI
Running multiple apps side by side will get to a later time

"A phone buzzing while you are in your work flow on your computer may be the very last thing you need, especially with the constant stream of interruptions we're facing while trying to operate in new conditions. Microsoft's Your Phone app and Connect to Windows integration on select Samsung devices, allows you to remain in the flow by allowing you to take calls, check notifications, see photos and messages, all from your Windows 10 PC. Now, on your Samsung Galaxy Note20, you are able to access and communicate with your favorite mobile apps directly on your Windows 10 PC with the Your Phone app," Microsoft announced earlies today.

In terms of what Samsung phones will support all of these features, this really is something that remains to be seen, but I'm guessing that the Galaxy S10 and also the Note10 will be the models which will almost certainly allow running Android apps around the Windows 10 desktop.

Both Google Chrome and Microsoft Edge have were able to improve their share of the market in July 2020, based on third-party numbers from NetMarketShare, by the design of products, the largest victim of the continued growth appears to be the one and only Firefox.

Mozilla's application is definitely the second most-used desktop browser, however that Microsoft Edge has completed the switch to Chromium people these days give it a shot, its market share is continuously declining.

And Firefox is actually heading down so fast that it already lost the second place, with Google Chrome and Microsoft Edge now spearheading the desktop browser market.

Recently, Google Chrome increased its market share from 70.19% to 71.00%, while Microsoft Edge jumped from 8.07% to 8.46%. Meanwhile, Firefox declined from 7.58% to 7.27%.

The new Microsoft Edge

The migration to the Chromium engine allowed Microsoft to show Edge into a cross-platform browser, and this is one of the reasons that contributed to the development of the new app.

Edge has become available not only on Windows 10, but also on Windows 7, Windows 8, Windows 8.1, as well as macOS. At the same time, Microsoft can also be focusing on a Linux form of the browser, along with a preview build is anticipated after the year.

But what made Microsoft Edge the 2nd most-used desktop browser available so quick following the switch to Chromium is certainly Microsoft offering it as being the default browser in Windows 10.

The brand new Edge replaces the legacy form of the browser because the default app in the operating system, with Windows 10 itself also becoming the world's number 1 desktop platform, Edge's share of the market increases too. Microsoft offers the new Edge both as a manual download so that as an automatic update on Windows 10 devices.

Google Chrome continues to be the world's number 1 desktop browser despite Microsoft's super-aggressive push for Microsoft Edge on Windows, and statistics reveal that nearly 70 percent from the systems available run the application produced by looking giant.

And also, since a lot of people depend on Chrome for their daily browsing, it's pretty clear that each single bug in the browser may have a massive impact, with millions of users potentially affected.

This is actually the case of the very single keyboard button that may be pressed accidentally in Google Chrome to possess all browsing data removed.

While you probably know already, Google Chrome allows users to pay off browsing data, including things like history, cache, cookies, and anything else. Carrying this out is possible in the settings screen of the browser, which you can just open manually from the Chrome UI.

But at the same time, if you want to jump straight to the browsing clearing screen, you can just copy the following code within the address bar:

chrome://settings/clearBrowserData

Doing this skips all the other steps and shows all the items that you can clear in the browser, therefore the only thing you must do next would be to select what you want to remove after which click the clear button.

But here's the problem. The clear data button is automatically highlighted, so if you accidentally press the enter button twice whenever you try to load this screen using the aforementioned code, you could remove all of the data without even knowing.

As TechDows spotted, Chromium engineers have discussed the issue inside a recent thread, explaining that it's super-easy to have all data removed accidentally, especially for beginners.

"Goodbye, data. Everything gets cleared immediately since the Clear Data button is concentrated by default. For expert users, the focused-by-default behavior is convenient, but at least in some cases we might not want so that it is. Specifically, entry ways geared toward new users will want to reach the dialog inside a safer state, where explicit activation of the button is required," the engineer said.

The very first proposal to handle the event ended up being to just make the cancel button the one that's highlighted in this screen, essentially eliminating the damage that an accidental press of the enter key twice might have.

"Let's consider getting the Cancel button focused by default instead. This way we are able to press tab once to arm the Clear Data button. It is a safety mechanism that protects all users whilst not causing an excessive amount of burden for those who like quick keyboard-driven clearing," the same engineer proposed.

Google, however, has found an additional way to cope with everything. The enter secret is no longer enabled in the browsing data removal screen, meaning you should utilize a button or touch input (if available) for the entire thing.

Quite simply, the clear button can't be triggered by pressing the enter button around the keyboard. So even though you accidentally press it twice when loading the dialog, there is little happen together with your data, as the second press is ignored from the beginning.

The change has already been implemented within the Canary form of Google Chrome, and that i tested it on Windows 10, and everything works just as described by Google. Obviously, it should escape to any or all users within the next Chrome stable update, no matter the platform - this means Windows users won't be the sole ones obtaining the updated behavior but those found on Linux and Mac too.

Windows 10 version 2004, or Windows 10 May 2020 Update, is rolling out in phases across the world, after Microsoft originally offered this release as a manual download for all those checking for updates in Windows Update, the company more recently started the automatic rollout to a small group of devices.

Only computers running Windows 10 version 1903 and Windows 10 version 1909 are included in this automatic rollout of the May 2020 Update, and now Microsoft says that its technique is advancing as planned.

Quite simply, the organization is able to provide the May update as an automatic download to more devices running Windows 10 version 1903 and 1909, as announced now.

"Windows 10, version 2004 is available for users with devices running Windows 10, versions 1903 and 1909, who manually aim to "Check for updates" via Windows Update. We are now starting a brand new phase in our rollout. While using machine learning-based (ML-based) training we've done this far, we're enhancing the quantity of devices selected to update automatically to Windows 10, version 2004 that are approaching end and services information. We'll still train our machine learning through all phases to intelligently rollout new versions of Windows 10 and deliver a smooth update experience. The recommended servicing status is Semi-Annual Channel," Microsoft says.

Pausing the update

What this means is those who're running Windows 10 version 1903 or version 1909 should be offered the update to version 2004 automatically via Windows Update without resorting to manually checking for updates in Windows Update.

The whole thing is going to be completed by Windows Update, so the only action that will be required on your side is really a system reboot to accomplish the update.

People who wish to block the update can pause updates on Windows Update to avoid the May update from installing on their devices.

If you insert a USB stick, external hard drive, DVD or any other media to your Windows 10 laptop, you're likely greeted with a pop-up asking exactly what the computer must do next. This is known as AutoPlay, so if you feel at all like me, you discover it a little annoying. If you wish to do away with AutoPlay, all you need to do is follow a few steps to show it off forever. Alternatively, you can customize the way it reacts to various media.

Here's how to customize AutoPlay pop-ups in Windows 10:

Disable Autoplay in Windows 10

1. Go to Settings > Devices.
2. Click AutoPlay around the sidebar.
3. Switch "Use AutoPlay for all media and devices" to off.

Pick Specific Actions

1. Open the Control Panel.
2. Choose AutoPlay.

Came from here, you can distinct kinds of drives and files must do whenever you insert media to your laptop. When you're done, click save.