If the DHCP feature in Windows 10 is causing problems or creating road-blocks, you can disable it pretty easily. Here're the steps to disable DHCP in Windows 10.

In the Windows based pc, the DHCP function is enabled by default. The DHCP (Dynamic Host Configuration Protocol) function accounts for assigning the IP addresses to all the devices on a network. So, when you're connected to a network, like in the home or office, your computer gets its IP address through the DHCP protocol. Among the key options that come with DHCP is being able to assign dynamic IP addresses. i.e, any time you connect or reconnect to some network, you might get a totally different Ip. This dynamic allocation removes the requirement for manually assigning the IP addresses and reduces the likelihood of IP address conflicts. Quite simply, the DHCP functionality is fairly beneficial in day to day situation.

If you want a specific Ip, you need to manually disable DHCP in Windows 10 and then configure Windows to obtain a static IP address. As well as, if the DHCP causes problems in your network connections, like when sharing folders or connecting to and from a server, it is best to disable the DHCP completely. You can manually configure all of the IP settings from the Windows 10 network manager.

In this simple and quick guide, allow me to show the steps to completely disable the DHCP functionality in Windows 10.

Steps to Disable DHCP in Windows 10

You are able to disable DHCP in the settings app in Windows 10. Listed here are the steps to follow along with.

Right-click around the network icon around the taskbar.
Select the "Open Network & Internet Settings" option.
Within the currently active network screen, click on the "Properties" button underneath the network connection.
Here, click on the "Edit" button underneath the "IP Settings / IP Assignment" section.
Select "Manual" in the drop-down menu.
Turn on the "IPv4" option.
Now, fill in the details from the IP address, Subnet prefix length, Gateway, and preferred DNS address.
Click on the "Save" button.
Close the Settings app.
Restart Windows 10.

That's it. You've successfully disabled DHCP in Windows 10. Should you ever want to enable DHCP back, simply follow the same steps but choose the "Automatic (DHCP)" option in steps 5 and disregard the after steps.

Important Notes:

Each network connection features its own DHCP settings. If you want to disable DHCP on all network interfaces, you need to stick to the steps for each one individually. For instance, in case your system has both WiFi and Ethernet, you need to configure DHCP for both of them individually.
You can get the Static IP details out of your ISP, network administrator, or in the router config page.
For "Subnet prefix length", try "24" or "16". Discover more about subnet prefix length out of this Cisco page.
When configuring static IP on the local network, make sure there aren't any duplicates.
For preferred DNS, you may either use the DNS supplied by your ISP or public DNS services like Google Public DNS (8.8.8.8, 8.8.4.4) or Cloudflare DNS (1.1.1.1, 1.0.0.1).
If you are using IPv6 then enable the IPv6 option in step 6 and configure it accordingly.